Konica Minolta bizhub 362 Driver Download

Konica Minolta bizhub 362 Driver Download

Konica Minolta bizhub 362 Driver Download

Konica Minolta bizhub 362 Driver Download

My Minolta Bizhub c554e copier jams the paper and stains the printouts. Konica Minolta bizhub 362 Driver Download So I will take out the Fuser and check if it needs to be replaced. First of all, unplug the copier and open the right door. Remove the transparent cable cover.

Disconnect the three cables. Remove the two screws on the bottom of the fusing unit and remove the unit. You can clearly see the problem of toner sticking to the roller. Since there is no Fuser, clean the inside of the copier thoroughly. Now I will prepare a new unit. It is very well protected during transport.

Konica Minolta bizhub 362 Driver Download Do not touch the red surface of the rollers as they are easily damaged. Let’s compare the old and new unit. Roller wear is visible on the old one. Insert the module into the Minolta copier and secure it with the two screws. Connect the three wires and screw on the plastic cover.

Don’t confuse the plugs. Close the covers and start the copier. After launching, I will make several color copies. I will check that the copier does not jam anymore.

Konica Minolta bizhub 362 Driver DownloadThe copier is not jammed and the image is of good quality. Now I will make 25 copies and we’ll see what happens? It looks like replacing the fuser has helped. Let’s see what the copies look like. I am very pleased that was the cause of my problems. Best regards and I invite you to watch my other films.

Konica Minolta bizhub 362 Driver Download